This update’s primary goal is to enhance user experience by delivering more accurate and relevant search results. The best search experience for users has always been Google’s main focus, and this upgrade is no exception.

So, what are the primary adjustments that this update brings about? Let me tell you, though. Google has significantly enhanced its search algorithm, especially in the fields of machine learning and natural language processing. These enhancements will allow the search engine to recognize user intent more clearly and provide more precise search results.

Moreover, Google has emphasized the importance of mobile responsiveness and site speed. Rapidly loading and mobile-friendly websites are more likely to appear higher in search results.

Currently, everyone’s foremost concern is “Which websites are likely to be impacted by this update?” According to statistics, websites with bad user experiences, low-quality content, and a lack of mobile responsiveness are likely to suffer the most. Furthermore, websites that heavily utilize out-of-date SEO techniques like keyword stuffing and link schemes may experience a sharp decline in their results.

So, in order to avoid any bad effects on their search engine rankings, website owners and digital marketers must make sure that their websites are current, mobile-friendly, and offer high-quality content.

This upgrade is a step in the right direction towards giving users a better search experience, and we can anticipate seeing more of these from Google in the future. Continue reading the article to find out how.

How should I get ready for the Google update in March 2023?

Howdy once more! It’s time to go into how you can get ready for the Google March 2023 update now that we’ve discussed it and how it can affect websites. Do not worry, my dear user, for I have some fun and original advice to get you going!

Audit your website to find any potential problems:

The first step in getting ready for any Google upgrade is to audit your website. You can use this to find potential problems and areas where your website can be improved. The common areas to concentrate on are content quality, mobile compatibility, and page speed.

Did you realize that Google’s ranking algorithm heavily considers page speed? In contrast to websites that take five seconds to open, websites that load in under two seconds have an average bounce rate of just 9%, according to a recent study. Hence, be careful to speed up your website to prevent any effects on your rankings.

Analyze and revise your content strategy:

Reviewing and updating your content strategy is the next phase. With Google’s machine learning and natural language processing capabilities having recently advanced, it is more crucial than ever to offer high-quality, pertinent information that addresses the user’s search intent.

Carefully examine your current material and note any gaps or potential improvements. Make sure to concentrate on producing information that benefits the consumer and responds to their inquiries.

Boost website performance and customer experience:

Website speed and user experience are important aspects in Google’s ranking algorithm, as was previously mentioned. The user experience and speed of your website must be optimized.

Here are some pointers to enhance the user experience and speed of your website:

• Choose a dependable hosting company.
• Image and other media file optimization
• Reduce HTTP request volume
• Employ a responsive layout that functions properly across all platforms.
• Boost the site’s navigation and organization.
• Language should be precise and straightforward.
• Create quality backlinks and get rid of the bad ones.

Backlinks are still one of the most important ranking elements in Google’s algorithm. So rather than concentrating on quantity, it’s crucial to create high-quality backlinks from reliable sites.

Also, it’s essential to get rid of any subpar backlinks that could damage the standing of your website. To detect any hazardous backlinks, use tools like Google Search Console or Ahrefs to disavow them.

Check the performance of your website and make any necessary improvements:

Finally, it’s critical to keep an eye on the functionality of your website and make any necessary improvements. See your traffic, engagement data, such as bounce rate and time on site, and search engine rankings.

Don’t freak out if you see any substantial changes with the Google March 2023 update. Use a data-driven strategy and modify your website as necessary in response to the facts. You can maintain your search engine rankings and keep one step ahead of the competition by doing this.

In conclusion, improving your website for speed, user experience, content quality, and backlinks is necessary to get ready for the Google March 2023 upgrade. You can make sure that your website is well-positioned for success in the always evolving world of search engine optimization by putting the correct methods in place.

Optimal techniques for post-update SEO

Hello, my cherished user! After discussing how to get ready for the Google March 2023 change, it’s time to talk about SEO recommended practices for after the upgrade. So grab a seat, and prepare for some fun and original advice!

Put a priority on high-quality content and user purpose:

Putting a priority on user intent and high-quality content is the first and most important best practice. It’s more crucial than ever to offer pertinent and worthwhile information that satisfies the user’s search intent because of changes to Google’s algorithm.

Did you know that a top-ranking Google page typically has 1,890 words? Thus, be sure to produce in-depth, educational content that offers the user value.

Improve for local and voice searches

Voice search and local search are growing increasingly popular, and it’s crucial to optimize your website for both. By 2022, voice searches are anticipated to make up 55% of all search requests, according to a recent report.

Focus on producing conversational content and utilizing natural language to optimize for voice search. Use local keywords in your content and optimize your Google My Business listing for local search.

To make your website more visible in search results, use schema markup

A sort of organized data called schema markup aids search engines in comprehending the content of your website. You may increase your website’s exposure in search results and provide the user more context by utilizing schema markup.

A recent study found that websites using schema markup have a click-through rate that is 33% greater than those without it. Thus, employ schema markup to increase the visibility of your website in search results.

Give responsive design and mobile optimization top priority

Google’s ranking algorithm heavily relies on responsive design and mobile optimization. Prioritizing mobile optimization and responsive design is crucial since an increasing number of internet users are accessing the internet through mobile devices.

Did you know that if a website takes longer than three seconds to load, 53 percent of mobile consumers would leave it? So, be careful to speed up and mobile-friendly-optimize your website.

Use SEO strategies that are ethical and sustainable

Ultimately, it’s crucial to use SEO strategies that are ethical and long-lasting. Avoid employing unethical tactics like link purchasing, cloaking, and keyword stuffing. Instead, concentrate on developing trustworthy backlinks, producing worthwhile content, and improving user experience on your website.

This will not only assist you in avoiding any potential Google penalties, but it will also assist you in creating a long-term, sustainable SEO plan.

In conclusion, post-update SEO necessitates a comprehensive strategy that emphasizes user intent, top-notch content, voice search, local search, schema markup, mobile optimization, and moral behavior. In the ever-evolving world of SEO, you may maintain and raise your search engine rankings by putting the proper methods in place.

Conclusion

Congratulations! You’ve reached the conclusion of our blog post about the Google update from March 2023. As we’ve already covered, it’s essential to stay current on Google’s algorithm changes if you want to preserve and boost your website’s search exposure.

You can stay ahead of the competition by putting the suggested tactics into practice, such as conducting a website audit, concentrating on user intent and high-quality content, optimizing for voice and local search, utilizing schema markup, giving priority to mobile optimization and responsive design, and engaging in ethical and sustainable SEO practices.

Keep in mind that the world of SEO is constantly changing, so it’s important to keep updated and adjust your techniques as necessary. And how can you ensure that you’re informed? Keep checking Cyfuture for additional blogs about tech news, of course!

Hence, take action, put the suggested strategies into practice, and keep an eye out for Google’s next upgrades. You may maintain and enhance your website’s search exposure and experience long-term success in the field of SEO by adopting the proper strategy and mentality.

Call to Action !

The post Decoding Google’s March 2023 Update appeared first on Cyfuture Blog.

Autonomous Driving

Autonomous driving refers to the capability of a vehicle to operate without human intervention. This involves a complex system of sensors, cameras, and AI algorithms that enable a vehicle to perceive its surroundings, make decisions, and take action accordingly. The level of autonomy can range from level 0 (no automation) to level 5 (full automation).

Autonomous driving has the potential to revolutionize various industries, such as transportation, automotive, insurance, and logistics. It has the potential to improve road safety, reduce traffic congestion, and lower the costs associated with human drivers. Additionally, it has the potential to improve accessibility for individuals who are unable to drive, such as the elderly or disabled.

Currently, autonomous vehicles are being tested in various forms, including self-driving cars, trucks, and delivery vehicles. Some companies and governments have already implemented limited autonomous driving systems in real-world settings. However, the widespread deployment of fully autonomous vehicles is still several years away and will depend on several factors, including regulatory approval, consumer adoption, and technological advancements. While there are many projections, it is widely agreed that the transition to autonomous vehicles will take place gradually over the next few decades.

Smart Robots

Smart robots refer to robots that are equipped with advanced sensors, computing capabilities, and artificial intelligence algorithms, enabling them to perceive and understand their environment and perform tasks autonomously or with minimal human intervention. They can range from simple robots that perform repetitive tasks to highly sophisticated robots capable of complex operations.

Smart robots have a wide range of applications, including manufacturing, healthcare, retail, and transportation. They can provide benefits such as increased efficiency, reduced labor costs, improved product quality, and enhanced safety. For example, in manufacturing, smart robots can work around the clock without breaks and perform tasks with high accuracy and consistency. In healthcare, smart robots can assist doctors and nurses with tasks such as monitoring vital signs, performing non-invasive surgeries, and delivering medication.

Currently, smart robots are becoming increasingly common in various industries, and their use is expected to grow rapidly in the coming years. However, the development and deployment of smart robots are still in their early stages, and significant advancements are expected in the near future. For example, developments in areas such as artificial intelligence, robotics, and sensor technology are likely to increase the capabilities and applications of smart robots. The future of smart robots is expected to be characterized by increased automation, higher levels of intelligence, and the integration of smart robots into various industries and aspects of daily life.

Space Technology

The current advancements in space technology include reusable rockets, the development of small satellites, advancements in satellite communication and imaging technologies, and the exploration of deep space. These advancements have led to increased access to space and have enabled new applications in areas such as earth observation, satellite-based navigation, and space-based research.

Space technology has the potential to have a significant impact on industries and society, including telecommunications, navigation, earth observation, and scientific research. For example, satellite-based navigation systems, such as GPS, have revolutionized the way we navigate and have numerous applications in industries such as transportation, agriculture, and finance. Space-based Earth observation technology has a wide range of applications, including weather forecasting, natural disaster management, and environmental monitoring.

The future of space technology is expected to be characterized by continued growth and innovation. Opportunities in areas such as space tourism, resource exploitation, and space-based renewable energy are expected to emerge in the coming years. Advances in areas such as hypersonic travel, the development of space habitats, and the exploration of deep space are also likely to play a major role in shaping the future of space technology. Additionally, the development of new technologies, such as in-orbit servicing, space debris removal, and the commercialization of low Earth orbit, is expected to drive growth in the space industry and create new opportunities for innovation.

Sustainability Technology

Sustainability technology refers to a wide range of technologies that aim to reduce the impact of human activities on the environment and promote sustainable development. These technologies include renewable energy sources (such as wind, solar, and hydro), energy-efficient buildings, green transportation, and water treatment technologies. Additionally, the circular economy, which aims to reduce waste and increase the use of recycled materials, is also an important aspect of sustainability technology.

Sustainability technologies play a crucial role in addressing global challenges such as climate change, resource depletion, and environmental degradation. By reducing greenhouse gas emissions, promoting energy efficiency, and improving resource utilization, sustainability technologies have the potential to create a more sustainable future for all.

Currently, there is a growing demand for sustainability technologies, and many countries are investing in research and development in this area. Additionally, private companies and organizations are also increasingly focusing on sustainability and incorporating sustainable technologies into their operations. The future of sustainability technology is expected to be characterized by continued innovation and growth, driven by the need to address global challenges and meet the growing demand for sustainable products and services. However, the widespread adoption of sustainability technologies will depend on several factors, including government policies, consumer demand, and technological advancements.

Computer Vision

Computer vision is a field of study that focuses on enabling computers to interpret and understand visual information from the world in the same way that humans do. It involves the development of algorithms and techniques that enable computers to analyze images and videos to extract meaningful information and make decisions based on that information.

Computer vision has a wide range of applications and benefits, including object recognition and tracking, face detection and recognition, image and video analysis, and medical image analysis. In industry, computer vision is used for tasks such as quality control and inspection, and in self-driving cars, computer vision is used for tasks such as obstacle detection and lane detection. In addition, computer vision is also increasingly being used in fields such as security, retail, and entertainment.

Currently, computer vision is one of the fastest-growing areas of computer science, and its applications are rapidly expanding. The development of deep learning algorithms has dramatically improved the accuracy and speed of computer vision systems, and there is growing interest in areas such as augmented reality, virtual reality, and autonomous systems. The future of computer vision is expected to be characterized by continued advancements in areas such as deep learning, real-time processing, and the integration of computer vision into a wide range of devices and applications. Additionally, the increasing availability of large amounts of data, combined with advances in computing power, is likely to drive further innovation in computer vision.

Sensor Technology

Sensor technology refers to the development of devices that can detect, measure, and transmit information about physical or environmental conditions. Sensors can be used to measure a wide range of parameters, including temperature, pressure, light, humidity, and motion.

Sensors have numerous applications across a wide range of industries, including healthcare, automotive, industrial, and consumer electronics. For example, in the healthcare industry, sensors are used for monitoring vital signs, while in the automotive industry, they are used for safety features such as airbag deployment and lane departure warning systems. In industrial applications, sensors are used for process control and monitoring, and in consumer electronics, they are used for features such as touchscreens and motion tracking.

The current status of sensor technology is characterized by rapid advancements in areas such as miniaturization, integration, and accuracy. The increasing demand for wearable devices, the Internet of Things (IoT), and autonomous systems is driving growth in the sensor industry. The future of sensor technology is expected to be characterized by continued innovation, including the development of new types of sensors and the integration of sensors into a wider range of applications. Additionally, the increasing demand for data, combined with the need for more accurate and reliable sensor systems, is expected to drive growth in the sensor industry in the coming years.

Distributed Ledger Technology

Distributed ledger technology (DLT) refers to a type of database architecture that is decentralized, meaning that it is spread across multiple nodes in a network and does not rely on a central authority for management. The most well-known example of DLT is blockchain, which is a secure, transparent, and tamper-proof ledger that can be used to track transactions and other types of data.

DLT has a wide range of potential applications and benefits, including supply chain management, digital identity verification, and the creation of decentralized financial systems. In supply chain management, DLT can be used to track the movement of goods and ensure transparency and accountability. In digital identity verification, DLT can be used to create secure and tamper-proof digital identities that can be used for a variety of purposes. In finance, DLT has the potential to create decentralized financial systems that are more secure, transparent, and efficient.

The current status of DLT is characterized by growing interest and investment, with many organizations and industries exploring the potential applications of this technology. However, there are also challenges to the widespread adoption of DLT, including scalability and security concerns. The future of DLT is expected to be characterized by continued innovation and growth, with increasing use cases and the development of new applications and use cases for this technology. Additionally, the increasing demand for secure, transparent, and tamper-proof systems is expected to drive growth in the DLT industry in the coming years.

Deep Learning

Deep learning is a subfield of machine learning that focuses on the development of algorithms inspired by the structure and function of the brain, known as artificial neural networks. These algorithms are designed to learn from large amounts of data, allowing them to make predictions or decisions based on that data.

Deep learning has a wide range of applications, including image and speech recognition, natural language processing, and autonomous systems. For example, in image recognition, deep learning algorithms can be used to identify objects, people, and scenes in photos and videos. In speech recognition, deep learning is used to transcribe and translate spoken words into text. In autonomous systems, deep learning is used for tasks such as object detection and obstacle avoidance.

The current status of deep learning is characterized by rapid advancements and growing interest, with many organizations and industries exploring its potential applications. The development of large and powerful neural networks, along with the increasing availability of large amounts of data, has led to breakthroughs in a wide range of applications. The future of deep learning is expected to be characterized by continued innovation and growth, with increasing use cases and the development of new applications and use cases for this technology. Additionally, the increasing demand for highly accurate and efficient machine learning systems is expected to drive growth in the deep learning industry in the coming years.

5G/ 6G

5G and 6G are generations of cellular technology that enable high-speed wireless communication between devices. 5G technology provides faster download and upload speeds, lower latency, and increased network capacity compared to 4G, while 6G is the next generation of cellular technology that is still in the early stages of development. 6G is expected to provide even higher speeds and more advanced capabilities, such as ultra-low latency and support for massive numbers of connected devices.

The benefits of 5G and 6G technology include increased speed and efficiency for mobile networks, improved connectivity for internet of things (IoT) devices, and the potential to enable new and innovative technologies and applications. For example, 5G and 6G are expected to have a significant impact on industries such as healthcare, where telemedicine and remote patient monitoring could be greatly improved. They may also drive advancements in areas such as virtual and augmented reality, autonomous vehicles, and smart cities.

The current status of 5G is characterized by growing deployment and adoption, with many countries and regions launching commercial 5G networks. However, there are also challenges to the widespread adoption of 5G, including limited availability in some areas and concerns about security and privacy. The future of 5G is expected to be characterized by continued growth and innovation, with increasing numbers of devices and applications being developed and deployed. 6G technology is still in the early stages of development and it is not yet clear when it will be commercially available. However, it is expected to be characterized by continued advancements and innovations, with the potential to drive significant changes and benefits for various industries and society as a whole.

Edge Computing

Edge computing is a distributed computing architecture that processes data at the edge of a network, near the source of the data, rather than in a central location. This enables faster processing times and reduced latency, as well as improved security and reduced bandwidth usage.

Edge computing has a wide range of applications, including Internet of Things (IoT) devices, industrial automation, and autonomous systems. For example, in IoT devices, edge computing can be used to process and analyze data generated by sensors in real-time, without the need to send that data to a central location for processing. In industrial automation, edge computing can be used to control and monitor industrial processes in real-time, improving efficiency and reducing downtime.

The current status of edge computing is characterized by growing interest and investment, with many organizations exploring its potential benefits and applications. The increasing demand for real-time data processing and the growing number of connected devices are driving growth in the edge computing industry. The future of edge computing is expected to be characterized by continued growth and innovation, with the increasing development of new applications and use cases for this technology. Additionally, the increasing demand for highly efficient and secure computing systems is expected to drive growth in the edge computing industry in the coming years.

Autonomous Analytics

Autonomous analytics refers to a category of artificial intelligence (AI) systems that can analyze and process data, identify patterns and insights, and make decisions based on that information without human intervention. These systems use techniques such as machine learning, natural language processing, and computer vision to analyze and interpret data and provide recommendations or automated actions.

The benefits of autonomous analytics include increased efficiency and accuracy, reduced human error, and the ability to process vast amounts of data in real time. Autonomous analytics has the potential to have a significant impact on various industries, such as finance, healthcare, and retail, where it can be used to improve decision-making, automate routine tasks, and provide real-time insights.

The current status of autonomous analytics is characterized by growing interest and investment, with many organizations exploring its potential benefits and applications. However, there are also challenges to the widespread adoption of autonomous analytics, including concerns about data privacy and security, the need for specialized skills and expertise, and the cost of implementing and maintaining these systems. The future of autonomous analytics is expected to be characterized by continued growth and innovation, with the increasing development of new applications and use cases for this technology. Additionally, the increasing demand for real-time insights and the need for efficient and effective data analysis are expected to drive growth in the autonomous analytics industry in the coming years.

AR & VR

Augmented Reality (AR) and Virtual Reality (VR) are technologies that provide immersive and interactive experiences. AR enhances the real-world environment with digital information, while VR creates a completely artificial and interactive environment. AR is typically experienced through mobile devices or specialized AR headsets, while VR requires a headset that covers the user’s eyes and ears.

AR and VR have a wide range of applications, including gaming, education, entertainment, and training. For example, in gaming, AR and VR can be used to create immersive and interactive experiences. In education and training, AR and VR can be used to provide hands-on and interactive experiences, improving retention and understanding. In entertainment, AR and VR can be used to create new forms of storytelling and experiences.

The current status of AR and VR is characterized by growing interest and investment, with many organizations exploring its potential benefits and applications. However, there are also challenges to the widespread adoption of AR and VR, including the need for specialized hardware, the limited number of available AR and VR experiences, and the cost of implementing and maintaining these systems. The future of AR and VR is expected to be characterized by continued growth and innovation, with the increasing development of new applications and use cases for these technologies. Additionally, the increasing demand for immersive and interactive experiences is expected to drive growth in the AR and VR industry in the coming years.

Read More: The Role of Augmented Reality in the Entertainment Industry

Takeaway

While these technologies offer many benefits, they also present challenges, such as data privacy and security, the need for specialized skills and expertise, and the cost of implementation and maintenance. It is important for organizations and individuals to stay informed about these technologies and their potential benefits, and to carefully consider the potential consequences of their use. Additionally, it is important to ensure that the development and use of these technologies are guided by ethical principles and align with the values of society. By doing so, we can maximize the benefits of these technologies while minimizing their risks and negative impacts.

The post Technologies You Must Put Your Bet On appeared first on Cyfuture Blog.

What had until then garnered little attention suddenly became the subject of key interest not just in the subcontinent but all around the world. As more and more searches piled up for the aforesaid keyword, its data on Trend surpassed all previous highs and hit a record level by day’s end.

These searches were made from just about anywhere in the world and caused a moment of turmoil of its own, with sites like Reddit, Forbes, Twitch, BBC News, Quora, and CNN denying requests, causing the web browsers to pop an error. As these websites turned down users and denied HTTP requests, users took to Google and overwhelmed it with colossal amounts of searches, causing the trend to break with the past.

Error 503 explained

Every time you click a URL, your browser communicates with the website, requesting its webserver to accept and send back the content, which is then parsed and displayed on your terminal.

Error 503 pops when your browser is either unable to reach out to the web server or the latter denies sending any data to you. This can happen due to a faulty firewall configuration or the server being overwhelmed with requests more than it can handle.

Content Delivery Network (CDN)

A little investigation into this revealed that the outage occurred on account of a glitch at the end of CDN provider Fastly, and though it was quick to respond, the damage had been done. Referring to it as a Global CDN Disruption, Fastly cited that people may continue to see decreased cache hit ratio for a little longer and urged that people bear with them.

According to the experts at Cyfuture, this incident has had so much hype in the first place because it’s fairly uncommon to see a CDN crumble, though it’s not a strange phenomenon either.

We should realize what would happen if it were not for these content delivery networks. Without these CDNs, these incidents – that are now an event of rarity – would be much less rare and our experience on the internet would nowhere be as engaging as it is today.

CDNs are lifebuoys

A CDN is technically a network of connected servers, each with the content of the website cached onto it, typically referred to – in the IT industry – as a server farm. Each node of the content delivery network caches all or parts of a website’s content, and is specifically built for sites that not only cater to multiple geographies but also experience swathes of users at once.

Without a CDN, a web server would be left to attend to all HTTP requests on its own, and is bound to run short on resources, causing a 503 to occur. CDN nodes are meticulously placed to allow for an even distribution of workloads, and even when one or more such nodes fail, the remaining dole out the resulting traffic onto themselves such that an outage almost never occurs.

In closing

Getting a CDN now can save your business a lot of embarrassment and also customers in the time to come. We at Cyfuture have been implementing highly resilient and reliable delivery networks for two decades and have a blemish-free track record of hosting more than 10,000+ clients so far. We can provide your business with a faster, affordable and austere CDN solution for you to rely on in the hour of need. Call us on +91-120-6025102 or reach out to us on sales@cyfuture.com for a free consultation on CDN.

The post Explained: Error 503, Global Outage and the Role of CDN in Website Performance appeared first on Cyfuture Blog.

The first wave of the pandemic was managed very well by India and contrary to world’s prediction, we had very less cases. All of us assumed that the virus had minimal or no impact on Indians due to their immunity.

But after almost one year, number of cases have started jumping and so are the number of deaths. Oxygen has become most precious commodity overnight. People are gasping for oxygen from pillar to post. People are dying because of need for oxygen, hospital bed, medicines etc. Governments are implementing strict lockdown type restrictions causing serious joblessness once again just to prevent spread of Covid.

Over the past 1 year, I have been examining the Covid situation across the world and the people cheering the vaccination drive in India. 

India approved emergency use of Covishield and Covaxin in Jan 2021 and started vaccinating its population, first the frontline workers from 16^th Jan 2021 and then people above 45 years from 1^st March 2021.

A belief has emerged that Vaccination is the way to fight this pandemic and put an end to it. The pace at which this pandemic has spread across the whole world has let all of us run a race against time and hence vaccines were introduced with limited testing. I agree that it has worked well on certain segments of the society in different parts of the world and hence, efforts should be made towards maximising this. At the same time, it has been observed that vaccines are having adverse effects on certain segments of recipients and rather than providing protection, it has caused infections.

My mother was really concerned about safety of the vaccine but with repeated assurances by Medical community and Political Leadership, we somehow convinced her to get vaccination on 14^th April, 2021. Within one week of the jab, she contracted Covid -19 and her oxygen levels dropped to below 90 without any comorbidity. Her HR CT scan displayed 30% lungs damage. I wondered how and when did it happen. So is the case with many other people in my circle across the country who have similar experiences, i.e., contracting Covid just after the vaccination, a few even dying despite the much-touted protection of vaccine.

In Feb 2021, total number of cases were below 10k per day which has jumped to 75k by end of March 2021 and 400k by end of April 2021. Is it just a coincidence that the 2^nd wave started just after the vaccination drive started?

Without blaming anybody, I would like to most humbly highlight few facts over here about India’s vaccination program

• Vaccine is actually injecting a weakened version of virus in our body. Vaccines are given to some 2-3 million people on daily basis of which thousands of them have probably become carriers of Covid -19 and are spreading this to others while many themselves are falling prey to Covid-19
• Despite taking two doses few people are requiring oxygen support
• People who’re falling ill are recommended anti-viral medicines like Ivermectin, Favipiravir, Remdesivir etc. despite WHO recommending no visible benefits along with antibiotics, after these medicines completed phase 3 trials. All these drugs kill your immunity which actually is needed most to fight any viral infection
• We cannot deny the fact vaccines were approved for use without proper trials recommended by the health organizations 

It seems very strange that no other country witnessed such a surge post the vaccination drive. Most countries have reported positive outcome, then why is India witnessing the reverse? Is it because

– we are using a different vaccine variant?

– complete efficacy of the vaccines was not ascertained before launching it?

– our immune response is different from others?

– the current mutations are different than the ones on which vaccine was tested?

Given what is happening, I’m writing this open letter to all who’re concerned to contemplate about vaccination.

The current situation calls for extensive surveys in the direction to ascertain the impact of the various vaccines being introduced in the country and eliminate any adversities. Instead of lockdown, we can perhaps stop the vaccination drive in the country for a few weeks to conduct random sampling of these vaccines along with large-scale trials and develop the vaccination infrastructure.

We should not forget that we were better off without vaccines and with rampant vaccinations, things have only become worse.

Before ending, I would like to add disclaimer that all views expressed here are my personal views and nobody should draw any inference without recommendations from medical experts.

The post Questioning India’s Vaccination Program appeared first on Cyfuture Blog.

If you are wondering if these plugins are a must-have for your website, they definitely are. Plugins are the building blocks of any site. Want to add a new feature to your website? Get a plugin for the same. Anything from adding a contact form, improving SEO, and creating an online store to adding email opt-in can be done easily with the help of a plugin.

Regardless of the kind of website you have, certain plugins can benefit almost any type of business. Here are some of the best plugins you can choose for your WordPress site.

• Yoast SEO

Making their website visible among users is the ultimate goal of any online business. While there are plenty of ways to get traffic to your website (free and paid), none can match the reliability of search engine optimisation or SEO.

And to make that happen, we have dozens of plugins out there. Of these, Yoast SEO stands out.

A highly popular plugin, Yoast SEO allows you to build SEO-friendly pages and thus improves traffic to your website. In addition, it also analyses the readability of your content.

Because most of the readers merely scan through your copy instead of reading it word-by-word, it can help you gain the reader’s attention. Yoast brings in a range of powerful features to boost your on-page SEO:

• Optimisation of pages and posts with the right keywords and meta descriptions
• Internal linking suggestion
• Readability Check
• Updates according to Google’s algorithm
• XML News Sitemaps
• Redirect Feature to build 301 redirects

Price: The basic version of Yoast SEO is free. There is a premium version with additional features that starts from $89/website.

• WPForms

You may have hundreds of users visiting your site but what if you don’t have their contact details? Forms that capture the contact details of your prospects help you reach them directly.

And to build such forms, we have an amazing plugin on WordPress-WPForms. This user-friendly tool lets you create a variety of forms through its drag-and-drop feature-contact forms, email subscription forms, payment forms, surveys, forms and polls with just a few clicks.

In addition, WPForms can integrate with all popular payment and marketing platforms, so it makes form creation an absolutely hassle-free activity.

Here are a couple of features of this immensely popular plugin:

• Pre-built templates for form creation
• Conditional Logic to Show/Hide Form Fields/Sections depending upon user behaviour
• Multi-page Forms to improve user experience
• Geolocation feature to display user location
• Surveys and Polls to gauge the response of web visitors

Price: The plugin comes with a free version although you can always avail of the pro version to access a wide range of templates.

• WP Rocket

We live in the age of instant gratification where quick page load time has become critical to the seamless functioning of your business. Fast loading pages create a hassle-free experience for users, making them spend more time on your site. A robust caching solution is the best way to accomplish the same.

WPRocket is an effective caching plugin that helps you enhance website speed and performance, even when you have no technical skills. The plugin accomplishes this by creating cached copies of each of your dynamically built webpages. This not only eases the burden on your servers but also slashes the weight of your HTML, JavaScript, and CSS files. The images present on your page are loaded only if a user scrolls down the page.

WPRocket comes with a range of highly sought-after features to optimize the loading time:

• Lazy loading to improve loading time
• Image loading on request
• Integrating caching solution with a Content Delivery Network (CDN)
• Support for WordPress Multisite
• Multilingual Compatibility

Price: Unlike most of the other tools on this list, WPRocket has no free version. There are three kinds of paid licenses, ranging between $49 to $249 annually.

• MonsterInsights

To keep a track of the analytics related to your online business, you need to integrate Google Analytics with your site. And that’s where MonsterInsights comes in handy.

The WordPress plugin allows you to set up Google Analytics on your website with just a few clicks and monitor, in real-time, how your website is performing. With MonsterInsights, you can get a grasp of complex stuff like user behaviour and sources of traffic.

By analysing the latter, you can focus on the channels that are bringing in the audience to your website and exclude the others; this way, you can optimize your marketing spend. The tool also tracks e-commerce metrics like conversion rate, total revenue, top products, and so on. Here are a few of its salient features:

• Real-time Statistics
• Google Analytics Dashboard
• Quick, Hassle-free Set Up
• Tracking of Google Ads
• Tracking of File Downloads

Price: The tool does come with a free version. However, a premium version is recommended as it helps unlock its true potential.

• UpdraftPlus

I am sure none of you wants accidents to happen on their WordPress site. But they do happen at one point or the other. Losing your site’s critical data would probably be the last thing you want for your business.

Under such a scenario, the right thing to do would be to create timely backups of your website. And that’s where our next WordPress plugin plays an indispensable part.

A popular WordPress plugin, UpdraftPlus comes with scheduled as well as automated backup options and stores these backups on the platform of your choice-Google Drive, Dropbox, Rackspace, or FTP.

You can even restore your website from a backup if required. Since these backups are stored in the dashboard, you can access them later as required. Here are some of its key features:

• Back-up and Restoring of Website with a Single Click
• Cloning and Migration of WordPress website
• Backup to a Remote Location
• Manual or Scheduled Backups
• Back-up for non-WordPress files and databases

Price: The basic version is free; the paid one offers additional features and priority support.

Choose Cyfuture to make the most of your WordPress Site

So, these are some of the plugins you absolutely must install for your WordPress website. While these can assist you in smoothly running your business, there are dozens of other plugins that didn’t find mention in this post.

It is not uncommon for website owners to use at least 15-20 plugins for their site. Installing, managing, and updating all these plugins is no cakewalk. Without a helping hand, you may not be able to get the most out of these plugins. And that’s where our expertise and experience come into the picture.

As a 20-year-old custom software development company, we have a team of qualified WordPress consultants to guide you on what kind of plugins to choose for your business and help you manage them with the utmost ease. With our technical prowess, you can focus on what matters the most-marketing your business. We will take care of the rest.

Need consultation regarding WordPress or any software development service? Fill this form NOW. Our experts will reach out to you within 24 hours.

The post 5 Must-have Plugins your WordPress Website absolutely needs appeared first on Cyfuture Blog.

But at the same time, WordPress is also one of those platforms that marketers and small business professionals in particular tend to keep at arm’s length if they’re not already using it. “Why do I need something like this when I already have a web designer?”, they often ask themselves. “I already pay a guy to update my blog and help me with my marketing campaigns. Do I really need another tool for that?”

In a word, “yes.”

There’s a reason why WordPress-powered domains absolutely dominate Google’s search results, with an estimated 2.28 billion combined results. It’s partially because WordPress is so easy to use, but there’s also quite a bit more to it than that, too. Things have gotten to the point where even if you have a process that already “works for you,” embracing WordPress is still a step worth taking for a wide array of critical reasons, all of which are worth a closer look.

The Major Benefits of WordPress: Breaking Things Down

One of the most immediate benefits of WordPress for marketers in particular will also be, for most people, among the most important – it’s just far more cost-effective than so many other platforms out there, especially when you consider what you’re actually getting for your hard-earned money.

Not only is WordPress easy to use (to the point where you can design a striking and effective website without even writing a single line of code), but it’s also SEO friendly by its very nature. A lot of people don’t realize that websites built using WordPress actually have strikingly simple (and, more importantly, consistent) code structures – making them ideal for Google indexing. Indeed, this is a large part of the reason why so many popular sites are powered by WordPress in the first place. The WordPress SEO components available for each page – all of which can be fully customized to meet your needs – become something of a self-fulfilling prophecy, to a certain extent.

Along the same lines, pages created using WordPress are also built using all the best practices of responsive web design. Remember that these days, the vast majority of all people coming to your website for the first time will be doing so via a mobile device like a smartphone or tablet. If your site works incredibly well on a desktop or laptop but is essentially non-functional on an iPhone, you’re doing yourself far more harm than good. Those people are going to immediately slam the “Back” button on their mobile browsers and the chances are high that they will never, ever return.

With WordPress page builders, on the other hand, you get access to all the benefits of responsive web design WITHOUT having to develop different versions of your pages for each site in your domain or campaign. Truly, the amount of time and effort you’ll save as a result of this (not to mention money) is more than worth it for most people.

Speaking from a long-term point-of-view, one of the biggest advantages that comes along with using WordPress comes by way of the extensive social media integration that you have access to almost immediately. WordPress builders allow you to bake seamless integration with various social networks into the very DNA of your websites. Forget about spending time logging into LinkedIn, Facebook, Twitter or other sites separately – once all the connections are made, your community will know the moment you upload fresh content for them to enjoy.

What this means is that the next time you sit down with a tree diagram maker like Visme (which I founded), you don’t need to worry about how you’re actually going to get the word out about that content once it finally goes live. WordPress will essentially take care of all of this for you, so that you can focus the majority of your time and attention on the tasks that matter most of all: letting getting to work on that next piece of stunning content that is really going to blow people’s socks right off.

Harnessing the Power of Content Marketing to Your Advantage

As a marketer or other business professional in particular, another one of the major benefits that comes along with WordPress has to do with the platform itself is ideal for not just content marketing but aggressive content marketing in a number of critical ways.

Once you’ve selected the right template and built your page, you can literally update your site’s content in a matter of seconds. You can upload fresh content to wherever you’d like almost instantly, all without going through a lot of complicated steps or updating a single line of code along the way.

But more than that, you can also update the actual design of your site just as easily – making it a perfect option for running different types of seasonal marketing campaigns. Is your Christmas campaign winding down and now you want to get your New Year’s-themed campaign started right away? Perfect – just make a few quick adjustments from your WordPress dashboard and you’ll be good to go.

Has a major national incident occurred that everyone is talking about (like, say, a sudden global pandemic that has captured everyone’s attention around the world) and you want to use a site like Respona to figure out a way to incorporate it or address it in your messaging? It’s easy thanks to WordPress, because the freedom and flexibility that the platform gives you right away will essentially allow you to respond in real-time.

Being able to update your content this frequently helps check a number of critical boxes for marketers – like it allows you to aggressively get the attention of your niche in a way that builds credibility at the exact same time. Remember that the more frequently you update your pages, the more authority you build in someone’s eyes. This means that even if they’re not ready to make a purchase today, the next time they are you’ve exponentially increased the chances that this purchase will be made with you in particular.

But in the end, it’s important to remember that WordPress is ultimately just a tool – the same as anything else. What that particular tool can do matters less than what you’re prepared to do with it.

It’s entirely possible to embrace WordPress and still not generate the results that you’re after. If you understand the advantages outlined above and know how to make them work within the goals of your campaign, however, there’s very little that WordPress won’t allow you to do. Make absolutely no mistake about it: that is a very exciting position for any small business owner or marketing professional to be in and it’s why WordPress is absolutely worth your time in the future.

About the Author

Payman Taei is the founder of Visme, an easy-to-use online tool to create engaging presentations, infographics, and other forms of visual content. He is also the founder of HindSite Interactive, an award-winning Maryland digital agency specializing in website design, user experience and web app development.

The post The Major Benefits of the WordPress Platform For Marketers Everywhere appeared first on Cyfuture Blog.

 Coronaviruses are a large family of viruses that cause fever and respiratory illnesses in humans. These viruses circulate in animals and some of them have the ability to transmit between animals and humans. Coronaviruses cause up to 30% of the common colds in human beings.

Coronavirus disease 2019, abbreviated as COVID-19 is a respiratory illness caused by a new Coronavirus that was first reported in Wuhan city of China. Since the time of its discovery in Wuhan, the new Coronavirus has triggered a global health crisis, infecting around 183,738 people and killing around 7,180.

In the past, these Coronaviruses have caused other epidemics such as Severe Acute Respiratory Syndrome (SARS) in 2003 and Middle East Respiratory Syndrome (MERS) in 2012.

What are the Symptoms of COVID-19? How does the Disease Progress?

The symptoms commonly reported in patients of COVID-19 include mild to severe respiratory illness, fever and dry cough. More often than not, these symptoms are mild and may appear 2-14 days after exposure.

So far, around 90% of the reported cases have been found to have fever and 70% have dry cough. Another common symptom, fatigue has been found in 40% of the patients. Sputum production was reported in every third person.

Other common symptoms include muscle pain or joint pain, sore throat, headache, chills, nausea, vomiting, nasal congestion and diarrhoea.

Below is a chart depicting the common symptoms of Coronavirus infection along with the percentage of patients in which they were found:

How Long is the Incubation Period of COVID-19?

Incubation period refers to the time between exposure to an infection and appearance of its first symptoms. For COVID-19, the incubation period ranges from 1 to 14 days, most commonly around 5 days.

How Long Does COVID-19 Last?

COVID-19 lasts for 2 weeks on an average.

According to a study by the WHO, the time from the onset of symptoms to clinical recovery has been around 2 weeks for mild cases. For critical cases, this figure hovers around 3 to 6 weeks. In cases where the patient died, the time from onset to death has been around 2 to 8 weeks.

Who are at a High Risk of Falling Sick from COVID-19?

The following groups of people are at a high risk of falling very sick from COVID-19:

• Older persons.
• Persons with chronic illnesses such as heart disease, high blood pressure, lung disease, cancer or diabetes.

What Information do we have about the Risk of Dying from COVID-19?  

As far as the risk of dying from COVID-19 is concerned, it is still not very much known to researchers. All they can do is rely on certain metrics to gauge how fatal this illness can be.

One of the key metrics is the case fatality rate (CFR) or the proportion of deaths from COVID-19 compared to the total number of people diagnosed with it for a period of time.

CFR (%) of COVID-19= Number of deaths from COVID-19/Number of confirmed cases of COVID-19*100

What’s important to note is that measuring CFR comes with a range of challenges. The first challenge is that the total number of confirmed cases is less than the actual number of cases because many cases have gone undiagnosed. The reasons could be plenty-people with mild symptoms don’t get themselves tested and not every sick patient visits a hospital. Plus, testing facilities are available in limited locations.

Besides, there cannot be a single CFR for any illness and COVID-19 is no exception. It changes with both time, location and population. The fatality rate is dependent not only on the disease but also on the individual and social response to it-the level and timing of the treatment received and the ability of the individual to recover from it.

So, the CFR for an illness can change over time and is dependent on the characteristics of the infected population: age, gender, medical history and so on.

Now, let’s have at a look at the CFR of COVID-19 on different parameters: location, age and underlying health conditions.

CFR of COVID-19 by Location

Here are the CFR figures for COVID-19 calculated up to 15 March 2020:

CFR Globally: 3.7%

CFR in China: 3.9%

CFR in the Rest of the World: 3.5%

As we have discussed above, these figures will continue to change. The figures are higher than the earlier estimates of 2% calculated in early February. This not necessarily mean that the situation has aggravated. CFR usually rises during an outbreak as more cases of the disease get identified and reported.

CFR of COVID-19 by Age

While the aforementioned CFR figures indicate the overall severity of the disease, they don’t tell us which age groups are more vulnerable to infection. Only by understanding the relative risks to different age groups, we can reallocate the resources in such a manner that high-risk groups are benefitted the most.

From what has been observed so far, older persons, particularly 70 or older are at the highest risk of dying if infected.

As per the data gathered from China, 15% of the people in the age group 80+ who were infected died while 8% of the people in the age-group 70-79 years who were infected succumbed to the illness.

One major reason why the elderly are at the highest risk is that they are the ones most likely to have chronic illnesses such as diabetes, cardiovascular diseases and respiratory illnesses.

Another point worth consideration is the high disparity in the fatality rates of young children and elders-only 0.2% of those diagnosed in each of the age groups-10-19, 20-29 and 30-39-have died while 3.6% in the age group 60-69, 8% in the age group 70-79 and 14.8% in the age group 80+ have succumbed.

An age-wise break-up of the CFR has been depicted in the chart below:

CFR of COVID-19 by Underlying Health Conditions

The early data gathered from China suggest that those with underlying health conditions are more likely to die from COVID-19 infection.

As per a study based on the data obtained from China, more than 10% of the people with a cardiovascular disease who were diagnosed with COVID-19 died. High fatality rates were also observed in people with other underlying diseases such as diabetes, chronic respiratory illness, hypertension and cancer. In contrast, the CFR among patients with no pre-existing health condition was a paltry 0.9%.

Here is a chart showing the break-down of CFR by underlying health conditions:

How do the Fatality Rates of COVID-19 compare with those of Seasonal Flu and other Contagious Diseases?

Researchers across the globe have conducted studies comparing the case fatality rates (CFR) of COVID-19 with similar illnesses such as seasonal flu, SARS, MERS and Ebola. Here is a table showing the comparison:

How is COVID-19 Different from Seasonal Flu?

While it’s true that COVID-19 is similar to seasonal flu, they are some key differences. Let us have a look at these differences:

Case Fatality Rate: The global fatality rate of COVID-19 has been reported to be around 3.7%. This is remarkably higher than that of seasonal flu-0.1%. That there is no vaccine or effective treatment for COVID-19 makes matters worse.

Contagiousness: COVID-19 is around twice as contagious as seasonal flu. While seasonal flu infects, on an average, 1.3 new people for each patient, COVID-19 infects 2-3 people.

Symptoms: Here is a chart showing the comparison of the symptoms of COVID-19 and seasonal flu:

How is COVID-19 Test Done?

The test for Coronavirus is similar to the test done for flu. First, the doctors collect a specimen from the suspected patient, store it in a sterile tube and send it to a laboratory equipped with testing kits. The lab technicians use a procedure called RT-PCR or reverse transcriptase-polymerase chain reaction to identify the presence of Coronavirus genome in the specimen. If the specimen contains Coronavirus, then the genetic material of the virus will be amplified and the person will be tested positive.

How did the COVID-19 Outbreak Start?

The Coronavirus COVID-19 outbreak appears to have originated from a seafood market in Wuhan, China where both live and dead animals are traded. Coronaviruses are known to get transferred from animals to humans. So, in seafood markets, where hygiene standards are difficult to maintain and where animals are densely packed, the risk of infection is particularly high.

It is believed that a group of stallholders in the Wuhan market contracted it from animals.

Interestingly, scientists at the Wuhan Institute for Virology have released a paper which claims that the genetic makeup of the new Coronavirus is 96% identical to the Coronavirus found in bats. So, bats could be the original hosts for the virus. While bats were not being sold at the Wuhan market, they could have infected the animals sold there.

The Wuhan market was closed for inspection and cleaning in early January, but by then the infection had spread beyond the market.

Some early cases of Coronavirus were found in people with no link whatsoever to the Wuhan market, so there could have been cases elsewhere that pre-date the Wuhan case.

How did COVID-19 Outbreak Spread to India?

In India, the first case of Coronavirus infection was detected in Kerala on January 30, 2020. Majority of the cases discovered subsequently had a recent travel history to countries like Italy, China and Iran, where the disease had reached dangerous levels.

Out of the first 50 cases reported in India, 39 had recently travelled abroad while 10 had come in contact with someone who had travelled abroad. Of the 39 who had travelled abroad, 23 had been to Italy, 7 to the USA and Dubai combined, 4 to Iran, 3 to China, 1 to Thailand and 1 to Oman.

The first three patients of COVID-19 were reported in Kerala, all three of these had returned from Wuhan, the epicenter of Coronavirus infection. The next two cases were reported in the first week of March; out of these two, one had travelled to Italy and the other to Dubai.

As on the day of writing this article, the number of Coronavirus cases in India has jumped to 139 including three deaths.

What Measures has India taken to Curb the Spread of COVID-19 Pandemic?

In India, the government has undertaken several measures at both central and state level to tackle the spread of the pandemic. Here are a few of these measures:

Restrictions on Foreign Travel: The government has suspended all existing visas till 15 April 2020. The only exception are diplomatic, official, international organizations, employment and project visas. All international passengers have to undergo a mandatory screening to detect symptoms of COVID-19.

People have been advised not to travel unless absolutely necessary. Indians who have visited seven countries-China, Italy, Iran, South Korea, Spain, France and Germany-on or after 15 February 2020 will be quarantined for 14 days. COVID-19 certificate has been mandated for Indians returning from Italy or South Korea.

Closure of Public Places: In wake of an advisory issued by the Health Ministry of India, all schools, colleges, gyms, swimming pools and other public places have been closed till March 31 2020.

Restrictions on Large Gatherings: In Karnataka, the state that reported first death due to Coronavirus, large gatherings have been banned for a week. In Delhi, all schools, colleges, cinema halls, gyms, weekly bazaars, night clubs, pubs and spas have been closed till March 31 to contain the Coronavirus infection.

Sanitization Measures: Across the country metros, buses and railways coaches are being sanitized regularly and thoroughly. Mass sanitization of buses is being carried out at bus terminals in Delhi and elsewhere. Central and Western railways have withdrawn curtains from all air-conditioned coaches in a bid to contain the infection. Railway authorities are sanitizing all coach fittings that are regularly touched by passengers.

Offices shut, offering work-from-home: In the wake of the Coronavirus scare, corporates are taking measures to protect their employees. While some of them have closed offices and asked employees to work from home, others have put restrictions on non-essential and international travel. Many of these organizations are sanitizing office spaces, putting sanitizers at entry and exit points, restricting physical meetings and distributing masks among employees.

How can I Protect Myself from Coronavirus Infection?

The first thing you need to do is to keep yourself updated on the latest information related to COVID-19 through reliable health websites and public health authorities.

You can reduce the chances of getting infected by taking some precautions:

Wash Hands: Wash your hands regularly using either alcohol-based hand rub or soap and water.

Disinfect: Use a virus-killing disinfectant to clean all frequently-touched surfaces such as door handles.

Avoid touching nose, mouth and eyes: Your hands are a big source of infection. They can pick up viruses and transfer the same to nose, mouth and eyes from where they can enter your body.

Follow Respiratory Hygiene: Cover your mouth and nose with elbow or tissue while coughing or sneezing. Dispose of this tissue immediately. Because the virus spreads through droplets, following these measures will protect people around you from all kinds of common viruses, including COVID-19.

Maintain Distance: Maintain at least one meter distance from anyone coughing or sneezing. This is because a person coughing or sneezing can spray droplets that contain viruses. If you are too close to the person, you can inhale these viruses and get sick.

Stay home if Unwell: If you experience any of the common symptoms of COVID-19-fever, dry cough or breathing difficulty-seek medical attention and isolate yourself by staying at home. Contact with your local healthcare authority, follow their advice and get yourself tested for COVID-19 as early as possible.

Avoid Non-essential Travel: Avoid all kinds of non-essential travel, keep away from all kinds of social gatherings and events. Avoid visiting malls, cinema halls, gym, parks, hotels, restaurants and other public places.

What are some Common Myths Surrounding the New COVID-19 Coronavirus?

Here are 9 common myths surrounding the new Coronavirus that you need to STOP believing right now:

The post Coronavirus Disease (COVID-19): Things you Need to Know appeared first on Cyfuture Blog.

Coronavirus or CoV, is a large family of viruses known to be causing respiratory illness, ranging from common cold to severe cases, like the Middle East Respiratory Syndrome (MERS-CoV) and Severe Acute Respiratory Syndrome (SARS-CoV).

A new strain, COVID-19, discovered in 2019 has not been identified in humans ever before. Declared as a pandemic by the WHO, COVID-19 is a form of coronavirus causing diseases in animals. The virus, however, possesses the spillover power, to jump from animals to humans, causing cold-like symptoms.

COVID-19 affects your lungs and airways, causing symptoms like runny nose, sore throat, cough, high fever. In severe cases, it causes pneumonia or breathing difficulties, and ultimately death.

• Coronaviruses are zoonotic pathogens meaning that they cause infections in animals and then are transmitted from animals to people.

• Many coronavirus strains were discovered in domestic poultry in the 1930s, causing ailments in the respiratory, gastrointestinal, liver, and neurological tracts of the animals. A total of 7 coronaviruses are known to cause diseases in humans.

• Bats are the most common hosts for the transmission of coronaviruses. Since the immune system of bats are very strong, they can fight off virus infections but do not overreact to them.

• COVID-19 virus has 79% similarity with the SARS genetic makeup. However, these two viruses are different and are their disease manifestations.

100-Year Pandemic History: A Curse For The World

Amidst all the concerns and the rising number of cases for coronavirus, people have started talking about the curse of the 20s, pandemics course of such scary infections history. The theory goes on like this.

History of Coronavirus: The Timeline As It Happened

Coronavirus was first discovered in 1931. Subsequently, the first coronavirus strain (HCoV-229E) was isolated from humans in 1965. However, until the outbreak of SARS-CoV, in 2002, only two human coronavirus strains were known.

These were HCoV-229E and HCoV-OC43.

There is a total of three groups of coronaviruses in existence:

Common founding’s are:

• According to studies, it has to found that bat coronaviruses can be the ancestors of many mammalian coronaviruses.
• A comparative study on the evolution of animal and human coronaviruses that the causes of common cold in humans, which are now global pandemics (SARS-CoV and COVID-19) crossed species from their animal reservoirs (bats and cattle) to humans within the last 200 years. This proves that coronaviruses continue to cross species barriers and cause novel diseases.
• Coronavirus in closely related with bat viruses. The source of origin of the virus is said to be Wuhan market. However, since bats were not sold in the market, there has to be an intermediate host that served as an immediate host for humans.

The progression of coronavirus through the human body

The following table states the spread of the infective virus into human body and how it progresses further.

Does sex, age, and underlying conditions have an impact on the vulnerability of a person for the virus?

The death rate specifies the probability of a person dying if infected by the virus.

For factors like the age, sex, and the underlying medical conditions, the following is the death rate figures.

Death Rate = Total number of deaths / total number of all cases

The 10 Myths and Facts Associated With Coronavirus

The State-Wise Cases of Coronavirus in India (as of 18 March, 2020)

• The total number of positive cases in India are 148.
• The total deaths in the country are 3.
• The number of discharged people is 14.

The Difference Between Total Cases, Active Cases, and Closed Cases?

Total Cases: This defines the total positive, confirmed, both past and present cases around the world. These include those patients that have recovered, those that are dead, and those that are currently seeking medical aid. The total coronavirus cases around the world is 98,739.

Active Cases: These cases are those patients that have been tested positive for coronavirus, and those that are currently under medical observation. These cases do not include discharged and dead cases. The active coronavirus cases around the world is 107,971.

Closed Cases: These include those cases that are closed, either, the patient has recovered and discharged or the patient is dead. The closed coronavirus cases around the world is 90,768 in which, 82,779 patients had recovered and discharged and 7,989 patients had died.

The Basic Protective Measures Against Coronavirus

The following tips will help everyone to fight back COVID-19 infection. Most of the people experience mild illness and recover but for others, the symptoms are more severe.

 Real Time Data of Corona Virus

 

The post DETAILED INFORMATION FOR THE PANDEMIC INFECTION OF CORONAVIRUS appeared first on Cyfuture Blog.